3 inch/70mm Turbo Diamond Polishing pads Wheels & Discs for granite Surface scratches removal
JDR Professional Turbo Wheels are designed to polish surface scratches, bevels, straight edges and reach into tight corners.
More reasons why fabricators continue to order:
- 4mm thick
- Straight edge design
- Very affordable
- Lower grits designed for efficient stock removal
- Will remain perfectly flat
- Virtually eliminates waves and distortion
- Allows stone to reflect light evenly and consistently
- Wet use only
- Recommended RPM is 4,000. Maximum is 5,000 RPM
Diamond Grits : #50 #100 #200 #400 #800 #1500 #3000
Frequently Asked Questions (FAQs)
Q: What materials can I use diamond polishing pad on?
A: granite,hard nature stone
Q: Why do I need to use the 50 Grit diamond polishing pad?
A: The 50 grit diamond polishing pad is necessary to remove saw marks and grinding marks. If the 50 grit diamond polishing pad is not used, the 200 grit will have to work exceedingly harder than necessary and will have a reduced life.
Q: Can I use the diamond polishing pad on my Makita tool?
A: The diamond wet polishing pads are designed to be used wet and at a low RPM.Ordinary angle grinders are much too fast and will cause the discs to burn.Do not try to run on high-speed machines that run above 4,500 RPM.
Q: How long does the diamond wet polishing pad last?
A: Due to the many types of materials the diamond pads are capable of polishing, it is very hard to say exactly how long the diamond polishing pad will last.However, if used properly your pads will last a long time.
Q: Can these diamond pads be used on my floor machine?
A: Although the diamond polishing pad and diamond floor pads may look similar, they differ greatly. These diamond polishing pads are designed only for hand polishing applications. Do not try to use these Diamond polishing pads on a floor machine.
