High Efficiency 35mm Diamond Core Bit Premium Quality Dry Diamond Core Bits for Granite Drilling
These diamond drill bits are perfect for drilling on granite or any other hard stone. These granite core drill bits are made to use dry, making it easier to use on smaller applications where water cannot be used. Which are designed that cuts into stone smoother and makes the bit last long.
| Features | Available in 1 1/4”, 1 3/8”, 1 1/2”, 1 3/4”, 2” |
| Designed for hard natural stone, granite, marble and similar materials |
| Vacuum brazed side protection for reduce heating |
| Fast drilling speed |
How to Use
Attach the Dry Core Bit onto your high-speed angle grinder or hand held core drill.
Mark the location of holes that need to be drilled.
Use a template as a guide on the stone in order to avoid any mistakes during drilling process.
Clamp a piece of stone scrap under the stone being core drilled to prevent excessive chipping or “blowout” on the back side of the stone.
Proceed with drilling, pressing steadily until the dry core bit drills through the stone.
When drilling multiple holes, cool off the dry core bit by dipping it in cool water after each drilled hole.
Frequently Asked Questions (FAQs)
Q: What materials can be core drilled using the Dry Core Bits?
A: The Dry Core Bits are designed to be used on granite, engineered stone and porcelain slab materials.
Q: Can I use the Dry Core Bits on marble?
A: No. Marble is too soft and the heat created from dry core drill may crack the material.
Q: Can I use the Dry Core Bit wet?
A: Yes. Although these core bits are designed for dry use, wet cutting is recommended whenever possible. When core drilling within residential homes, the dry application is highly recommended; this will save time and money for time consuming clean-ups of the residence.Yes. Although these core bits are designed for dry use, wet cutting is recommended whenever possible. When core drilling within residential homes, the dry application is highlyrecommended; this will save time and money for time consuming clean-ups of the residence.
Q: What is the main advantage of using dry core bits over wet core bits?
A: We realized that many customers wanted to use wet core drills without water on the job site. When an installer has to makes an additional hole or two, they can not use water since the stone is already installed and using water will be difficult and costly due to the time consuming clean-up.
